3630 FM 2181 Ste 103

Hickory Creek, TX 75065


Mon - Fri 8.00 - 5:00

Sat -Sun By Appt


AlphaLift Steel Pier Technology

Steel Piers Solve Foundation Problems for Good

AlphaLift Steel piers are driven deep into bedrock or load-bearing strata — giving your home foundation real support! Concrete piers usually stick your home to the unstable clay soils that cause your problems in the first place. Most times, concrete piers simply can’t reach deep enough for their adjustments to last. 

Very simply, without reaching load-bearing strata, you’ll never repair your foundation problems for good.  AlphaLift’s steel pier system drives to the load-bearing strata or bedrock every time, even in rare areas that have over 30 feet of unstable soil under your foundation. Once our steel pier system is in place, there is no future maintenance. That’s it, you’re done. Your foundation is fixed for life & should have no future issues. 

AlphaLift 7 Step Foundation Repair Process 

Every AlphaLift Foundation Repair Follows These Easy Steps

1. Call To Schedule a Demo:

Give our team a call today to schedule a free concrete slab foundation inspection.

2. Inspection & Estimate:

A certified AlphaLift Foundation Repair expert will fully evaluate your home. This 30 minute to 1 hour-long evaluation will include an elevation survey and an explanation of the assessment. If the home requires repair, AlphaLift Foundation Repair will provide an estimate.

3. Project Scheduling:

Upon acceptance of the AlphaLift Foundation Repair proposal, the repair will be scheduled at the convenience of the customer. Most repairs only require 2-4 days on-site, and the owner can go about normal life without disruption.

4. Project Start:

Phase 1 of the Foundation Repair Process – Small holes are manually excavated at each steel pier location and all dirt is bagged up in heavy-duty bags directly next to the holes.

5. Steel Pier Installation:

Phase 2 of the Foundation Repair Process – Steel brackets are installed under the grade beams of your concrete slab and utilized to hydraulically drive AlphaLift Steel Piers to the load-bearing strata or bedrock.

6. Restore Elevations:

Phase 3 of the Foundation Repair Process – After all recommended piers are installed, hydraulics are connected to all steel piers and utilized to recover elevations. After all elevations are recovered, the steel piers are locked in place so the home will never again experience problems.

7. Project Cleanup/Completion:

Phase 4 of the Foundation Repair Process – All excavations are refilled, all flatwork is replaced, and the job-site is completely cleaned. The home is now protected for life and the owner can rest assured knowing their foundation problems are permanently resolved!


All AlphaLift Foundation Repairs Include the Following

AlphaLift Warranty

  • Lifetime protection
  • Transferable to all owners

Owner Protection

  • Full umbrella insurance policy covers the entire project
  • Fully licensed
  • Fully bonded

    Managed Details

    • Experienced onsite supervisor
    • Permitting
    • Inspectors
    • Hydrostatic plumbing tests
    • Certified Materials
    • Minimal disturbance
    • Estimated days onsite


    Whether your foundation needs repair or nothing at all, AlphaLift is here to help. To get the process started, simply fill out the estimate form and our team will reach out shortly.

    Prefer to schedule by phone? Please feel free to contact us.


    Fill out this form to request a call back